E_MH_Mounting_instructions_Skylux_Cintralux_Alu_25mm_fixed_parts_flat_curb
01/04/2020
16/20
Remove the
protective film from the PC end piece retainer sheet.
Blow the sawdust out of the grooves and
tape up the sawed edges with the supplied BB25 tape.
Place the sawed panel back into the bottom profile end piece LP725.
Do this in the same way for the other end of the barrel vault.
9. End piece retainer profile
Now place the
end piece retainer profile LP726 on top of the sawn off PC end piece retainer sheet.
Do this in the same way for the other end of the barrel vault.
Sawn PC 25 mm end
piece retainer sheet
LP725
Bottom profile end piece
LP726
End piece retainer
profile
LP725
Bottom profile
end piece
Sawn PC 25 mm
end piece
retainer sheet
LP726
End piece
retainer profile
LP502
Bottom arch
LP725
Bottom profile
end piece
BB25 tape
BB25 tape
