E_MH_Mounting_instructions_Skylux_Climalux
01/11/2017
16/36
Gutter
Multiple gutter elements can be connected to each other for gutter lengths > 7 m.
A gutter support must be installed at every gutter connection point.
The gutter profiles can be linked using connection pins 909 and the connector profile GIX. Use silicone SG20 as
sealant.
GLX + 909 (2x)
GX + GIX + 909 (4x)
GX
GX
909
GIX
GLX
909
A raised profile GR can be installed on the GX gutter. Position
the side gutter slide ends first and subsequently fasten the
GR profile on to the gutter every 500 mm.
500
GR
Install the water outlet in the gutter opening and seal using
silicone.
GC
GX
The ornamental frame GLX is clipsed by a turning movement
on to the gutter. Start at one of the ends.
click
Place the pre-assembled gutter on the posts and fasten the
construction using lacquered screws ZSG. The gutter slide
ends must be pre-installed now if the gutter is installed
between two walls (see page 29).
ZSG
ZSG
GX
PX
