E_MH_Mounting_instructions_Skylux_Climalux
01/11/2017
34/36
Specific installation tips for LED lighting
All work on electrical parts must be performed by a professional electrician according to the local rules and
regulations for electrical systems.
ClimaLED spots: see separate installation instructions
Installation of the ClimaLED light strip on the gutter GX:
Follow the instructions below during the installation and connection to the electrical system.
Mounting of the LED profile and the LED strip:
Transformer:
Foresee 1 transformer per LED strip of maximum 7
meters. Pull the extenstion cable (6 m) through the
lateral rafter of the wall profile to the gutter.
The transformer is placed in the wall profile, for which
there is some space between the wall profile MX and
the spacer AX.
MX
AX
Chip connection:
Connect the LED chip to the transformer chip (IP44).
The GDGL profile is taped against the gutter GX with
the supplied double-sided adhesive tape.
The LED strip is slid into the profile. Foresee a recess
as indicated for the cable opening. A chip for the
connection to the transformer is located at the end
of the LED strip. An additional 6-metre cable is also
included to ensure the transformer can be installed in an
accessible location.
GDGL
Tape
15 MM
8 MM
