Skymaster DCX 10 Operating Instructions Manual Download

Page: 13 / 20

GB 11

5. Configuration and Operation

- Select favourites
Use the CH

왖

왔

, Vol

왗

왘

buttons and the OK button to select the respective channel in the

favourite column. Then use the CH

왖

왔

buttons and the OK button to allocate the channel in the

category overview which has just appeared. The following categories are available:
[1] Movies, [2] Music, [3] Cartoons, [4] News und [5] Sports.
Select point [0] “Unselect” to delete a channel from a favourite category. Please observe the point
“Edit Favourite Lists” in order to sort the favourite lists.

- Lock channels
Use the CH

왖

왔

, Vol

왗

왘

buttons and the OK button to select the channel which you wish to lock

in the column with the lock symbol. Press the OK button to lock the channel. Successful locking is
indicated by a “√” in the respective column. The channel can now only be viewed after entering a PIN
(factory setting “1234”). Reselect the channel and press the OK button to unlock the channel.

- Delete channels
Use the CH

왖

왔

and Vol

왗

왘

buttons to select the channel which you wish to delete in the column

with the “X” symbol and press the OK button. The channel will be deleted as soon as you exit the
“Edit Channels” menu. If, before exiting the menu, you decide not to delete the channel, reselect the
channel and press the OK button. The channel will not be deleted when you exit the menu.

- Add channels
Only access this menu if you are familiar with digital satellite technology.
To add a channel as described below it is necessary to have the exact data to ensure reception of the
desired channel after data input. If you do not have all the required data, we recommend adding the
desired channel to your program list via the menu item “Setup Menu”

앶앸

“Channel Search”.

Select the symbol in the upper menu bar.
Use the CH

왖

왔

and Vol

왗

왘

buttons and the OK button to enter the respective parameters.

The following parameters can be set:
Satellite:

Select the channel's satellite here.

Transponder, Frequency, Symbolrate, Polarity, FEC:

Enter the exact data of the channel which you wish to add.

Channel Name:

Enter the name of the channel via the keypad which appears on
the screen. (See below for keypad explanation.)

Audio PID; Video PID; PCR PID:

Enter the exact PIDs (ID rates) for the audio, video and data
packet of a channel.

As soon as you have entered all the settings correctly, press the EXIT button to auto-matically add
the new channel to the end of the program list.

- Change channel data
Select the symbol in the upper menu bar and press the OK button.
The following settings can be changed in this menu item:
Change channel name, change audio PID, change video PID, change PCR PID

Change channel name:

Use the CH

왖

왔

buttons to select the channel whose name you wish to

change and confirm your selection via the OK button.

A keypad appears. Use the CH

왖

왔

and Vol

왗

왘