Skymaster DCX 10, Operating Instructions Manual

GB 7

5. Configuration and Operation

5.2.3 Channel Search
Select the option “Channel Search” in the “Setup Menu” and press the OK button. A window with the
following menu items appears on the screen. A value can be set for these items: “Satellite“, “Tune
Method”, “Transponder”, “Frequency”, “Symbolrate”, “Polarity”, “FEC”, “Function” and “AGC Signal”
(signal strength).

Satellite:

Select from the saved list.

Tune Method:

Sat (Free) / Sat (Free+Scr) / TP (Free) / TP (Free+Scr) / NIT (Free) / NIT (Free+Scr)

Transponder:

1~999

Frequency:

Automatic / Manual

Symbolrate:

Automatic / Manual

Polarity:

Horizontal / Vertical / Right / Left

FEC:

Auto, 1/2, 2/3, 3/4, 5/6, 7/8

Function:

Attach, Delete, Change

AGC Signal:

Displays the strength of the received signal.

Tune Method:
SAT (Free+Scr): Searches for all the free and scrambled channels at the satellite.
SAT (Free):

Searches for all the free channels at the satellite.

TP (Free+Scr): Searches for all the free and scrambled channels at a specified transponder.
TP (Free):

Searches for all the free channels at a specified transponder

NIT (Free+Scr): Searches for all transponders which belong to a channel group.
NIT (Free):

Searches for all transponders which belong to a free channel group.

Transponder:
Specify the transponder which you wish to search for here (only possible in TP and NIT tune method).

Frequency, Symbolrate, Polarity, FEC:
Enter the exact data for manually locating a channel or program here (only possible in TP and NIT tune
method).

AGC Signal:
Here it is possible to see the exact strength of reception between the receiver and the setup satellites.
You will probably have to readjust your antenna if the value is too low or the TV picture poor.

•

Scroll up and down the list via the CH 

왖

/

왔

buttons.

•

Select the desired value via the Vol 

왗

/

왘

buttons.

•

Select the value and press the OK button to confirm your setup.

•

Press the EXIT button to exit the menu and return to the previous mode.