07
Picture - 04
Expeller Dish
IMPORTANT
The expeller dish shall always be used , notwithstanding the other discs or
grilles in function
.
The expeller dish is used to help the processed products way out, ejecting
them.
2.4
Selecting the Throat
IMPORTANT
Under no circumstances , hands or other objects , unless the pushers
supplied
with the machine , shall be used to push the food inside
the throats .
The use of the correct throat , with the correct pusher , shall be obeyed .
The Ram Feed Arm must be steadily pressed , because on the contrary the
food will be displaced inside the throat , producing irregular cuts .
The Food Processor PAIE works at high speed , therefore its feeding shall be
equally fast .
For smaller size products , such as carrots, a better cut achievement is
obtained using the Round Pusher B (Pic.-05) .
When to prepare a fruits or vegetables combination , using only one disc , or
one disc and a grille , always start cutting the softer product , finishing with the hard
ones .
When using the Grater Disc , it will be possible to change the grain size . With
a light pressure the grains will be thinner, increasing the pressure the resulting grain
size will be larger .
18
4.3.2 Precautions
Check if motors, belts, chains or gears and the turning or sliding parts of the
machine produce abnormal noises .
Check the tension of the belts and chains and replace the set when belt,
chain or gears show signs of being worn out.
When checking tensions of belts or chain DO NOT introduce your fingers
between belts and pulleys , nor between the chains and gears.
Check protections and safety devices to make sure they are working properly.
4.4 Operation
4.4.1 Advices
Be sure your hair is not loose in order to avoid getting caught by turning parts
which could lead to a serious accident. Tie your hair up well and/or cover your head
with a scarf.
The operation performed by not trained or skilled personnel shall be
forbidden.
Never touch turning parts with your hands or in any other way.
NEVER operate machine without all original safety devices under perfect
conditions.
4.5
After Finishing The Work
4.5.1 Precautions
Always TURN THE MACHINE OFF by removing the plug from the socket
before cleaning the machine. Never clean the machine unless it has come to a
complete stop. Put all components back to their functional positions before turning it
ON again. Check level of oil, if any . DO NOT place your fingers in between belts
and pulleys nor chains and gears.
Summary of Contents for PAIE
Page 2: ......
