Digi Spy V3 Manuale
Natural Sound Mode Natural Sound Stop
◇
In the mode of Natural Sound Mode,press and release the button,TALK to pause,press and
release again to choose the next Natural Sound.Press and release the button,MODE to get
out.
DVR Function Introduction
This product is a multifunctional clock provides the DV functions including video,audio,motion
detection, webcamera, movable disc.It supports TF Card and remote control function. The max,
memory can be upto 32GB,the high capacity battery provide the enough power for long time
recording. Just because of this many functions and features, it can be used as home security
monitor.
1
、
Operation
（
1
）
Turn On
Open the right side lid of camera,insert the TF card,push the button to ON.
（
2
）
Press the button,
on remote control untile the blue indicator is burning.It enters into the
Standby Status.
（
3
）
Press the button,
to enter into the Video Status. The Blue Indicator is off after it flashes
three time. Press the button,
again to stop video. The Blue Indicator is burning.
（
4
）
Press the button,
to recourd audio,the blue indicator will be off after it flashes three
times.Press the button again to stop the recording.The blue indicator is burning.
（
5
）
Press the button,
to shoot a image,the blue indicator will flash one time.
（
6
）
Press the button, to start this function,press and release the button again to stop it.The blue
indicator will be burning.
（
7
）
Press the button,
to turn off the camera,the blue indicator will be off.
（
8
）
Push the button to ON,connect the camera and PC,then,press and release the button,
on
remote control.
（
9
）
Webcamera
Install the software in CD, Push the button to ON
Press the button,
to turn on the camera, Connect Camera and PC with original cable
（
10
）
Charge
Push the button to off, Connect the camera and power source
The red indicator is burning, During charging,the red indicator is burning, When it is full,the red
indicator is off
Notice, PC also can provide the power to it.
(11
）
Reset
Because of the wrong operation or any other unknown reasons, there is no any feedback from
the camera,please push the button to OFF and push it to ON again.
（
12
）
Low Power
When it is low power,the blue indicator will flash quickly.
Pag. 4
