Change and charge battery of quadcopter
1. Press power swicth for one second
turn off power,open battery cover.
l
3.Connect the USB plug to your computer, then
connect the battery cable to the USB connector
(the LED indicator stays off when charging and
turns on when charging is complete).
2.Pull out the battery wire from
the power port.
4.Reconnect the battery wire to
power port, close the battery
cover.
Charging the quadcopter for11 Ominutes will provide at least 7 minutes of flight time.
The quadcopter can fly to a distance of up to 50 m when flown outside with the remote
control. WIFI ourdoor control distant about 25m.
Pay attention to the following when charging the battery:
Never expose the charged battery to high temperatures such as naked flames or electric
heaters, as this may damage the battery or cause an explosion.
Never use the battery to hit or strike the surface of hard objects.
Never place the battery in water and ensure that it is stored in a dry place
Never dismantle the battery.
Never leave the battery unattended whilst charging.
When it is charging, please do not reversely connect the positive and negative poles of
the battery terminal.
Mode 2 model-control
Flight Controls
Up and down
t
t
�
t
l
Forward and backward
Push the left control stick up and down Push the right direction control rudder up
quadcopter will up and down.
and down to fly forward and backward.
-
06
I
