SkyPilot SkyExtender DualBand Installation and Setup Guide
49
Command-Line Interface ,” for instructions on verifying the address of the
access point from a serial console.
Starting the configuration tool
To run the configuration tool, you need the current address of the access point
component of the SkyExtender DualBand. (The default IP address of the access
point is
198.68.0.3
.)
If the access point was assigned an IP address by a DHCP server, it must be within
the address space the DHCP server uses to populate devices. (For more
information on getting an IP address assigned by DHCP, see the previous
section.)
To start the configuration tool:
1
Open a Web browser and enter the URL of the access point.
Figure 31 shows an example.
Figure 31. Entering the access point URL
NOTE
The access point uses the Secure Sockets Layer (SSL) for secure
transmission across the Internet. By convention, a URL that
requires an SSL connection begins with
https
instead of
http
.
Depending on your browser settings, a dialog box may appear that asks you
to confirm certificate authority for the Web address. Click
OK
to proceed.
A prompt appears, asking you to enter a user name and password.
Summary of Contents for SkyExtender DualBand
Page 1: ...SkyPilot SkyExtender DualBand Installation and Setup Guide...
Page 4: ......
Page 6: ...SkyPilot SkyExtender DualBand Installation and Setup Guide 6...
Page 44: ......
