8
3
Plug the camera power cable into the camera socket
located next to the ON/OFF switch on the Drone.
The camera's power is supplied by the Drone battery.
The camera powers up when you turn on the Drone.
1
3
2
4
Pairing the controller
Taking off
Flat, level surface
The Drone goes into standby once it is paired with the
controller. To start the motors, depending on which mode
the controller has been set to (default is mode 1) push
both left and right sticks to the positions as shown on the
right. The propellers will start spinning slowly, enabling
the Drone to now proceed for takeoff.
Powering down the motors
To power down the motors after you have safely landed
the Drone, simply push both left and right sticks all the
way down as shown on the right for 2 seconds.
PREPARE FOR FLIGHT
