www.skyrc.com
- 16 -
PRODUCT SPECIFICATIONS
The static thrust calculation is taken from the October 86 AMA magazine,
air density is based on 29.92 in Hg, and propeller pitch is not used in this
calculation. Practical tests revealed very little if any change in thrust due
to pitch variation at the same RMP.
It is believed that this is partly due to any increase in thrust being negated
by blade stalling and a more turbulent influx area with increased pitch.
This obviously only applies to static conditions, not flying conditions.
PRODUCT SPECIFICATIONS
WARRANTY AND SERVICE
We guarantee this product to be free of manufacturing and assembly
defects for a period of one year from the time of purchase. The warranty
only applies to material or operational defects, which are present at the
time of purchase. During that period, we will repair or replace free of
service charge for products deemed defective due to those causes.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Manufactured by
SKYRC TECHNOLOGY CO., LTD.
www.skyrc.com
You will be required to produce proof of purchase (invoice or receipt).
This warranty is not valid for any damage or subsequent damage
arising as a result of misuse, modification or as a result of failure to
observe the procedures outlined in this manual.
Max input voltage: 60V
Voltage measurement range: 2-8S LiPo/LiFe/LiIon
Voltage display resolution: 0.001V
Volt Port: 2.54mm pitch pins, 9 pins
Max current: 100A
Shunt resistance:0.001ohm
Displayed resolution A: 0.01
Temperature resolution: 1 Celsius / 1 Fahrenheit
PPM signal output: 750uS – 2150uS
Number of propeller measurable : 1 to 5
Propeller rotating range: 1-60000RPM
Dimension: 95.3x72.8x21.5mm
Net Weight: 85g
