background image

CONFORMITY

 

DECLARATION

CONFORMITY

 

DECLARATION

Conform

Conform

Conform

Conform

CE-LVD

CE-EMC

EN60335

FCC-VOC

FCC

 

Part 15B

WARRANTY

 

AND

 

SERVICE

We  guarantee  this  product  to  be  free  of  manufacturing  and  assembly  defects  for  a 
period of one year from the time of purchase. The warranty only applies to material or 
operational defects, which are present at t he time of purchase. During that period, we 
will  repair  or  replace  free  of  service  charge  for  products  deemed  defective  due  to 
those causes.

You will be required to produce proof of purchase (invoice or receipt). This warranty is 
not  valid  for  any  damage  or  subsequent  damage  arising  as  a  result  of  misuse, 
modification or as a result of failure to observe the procedures outlined in this manual. 

This  symbol  means  that  you  must  dispose  of  electrical 

  from  the 

General household waste when it reaches the end of its useful life. Take your 
charger to your local waste collection point or recycling centre. This applies to 

all  countries  of  the  European  Union,  and  to  other  European  countries  with  a 

separate waste collection system.

devices

Electromagnetic  compatibility  (EMC)  --  Part  6-3: 
Genericstandards  -  Emission  standard  for  residential, 
commercial andlight-industrial environments.

Electromagnetic  compatibility  (EMC) -- Part 6-1: Generic 
standards  -  Immunity  for  residential,  commercial  and 
light-industrial environments.

Electromagnetic  compatibility-Requirements  for 
household  appliances,electric  tools  and  Similar 
apparaturs - Part 2: Immunity-Product family standard

Electromagnetic  compatibility-Requirements  for 
household  appliances,electric  tools  and  Similar 
apparaturs - Part 1: Emission

EN 55014-1:2006

EN55014-2:1997
+A1:2001

EN61000-6-1(2007)

EN61000-6-3(2007)

Test Standards

Title

Result

SKYRC  QUATTRO  B6AC  satisfy  all  relevant  and  mandatory  CE  directives  and  FCC 
Part 15 Subpart B: 2008.

For EC directives:
The product has been tested to meet the following technical standards:

For safety of household and similar electrical appliances. 

Electromagnetic compatibility (EMC), Conduction Emission
 & Radiation Emission.

Conform

Conform

Summary of Contents for Quattro B6AC





























Reviews: