13 ·
D250
1) LiPo Battery Connection with Balance Adapter
2) NiMH/NiCd or Pb Battery Connection
TO AVOID SHORT CIRCUITS, ALWAYS CONNECT THE CHARGE LEADS
TO THE CHARGER FIRST, AND THEN TO THE BATTERY. REVERSE THE
SEQUENCE WHEN DISCONNECTING THE PACK.
WARNING!
2. Connecting the battery
Balance Socket
The balance wire attached to the battery must be connected to the charger with the
black wire aligned with the negative marking. Ensure correct polarity!
For safety reasons, the default setting for charging Lithium (LiPo, Lilo, LiFe and LiHV)
battery is using balance adaptor to connect battery and charger in Charge, Fast Charge,
Balance Charge and Storage modes. But if the battery comes with no balance wire, it will
prompt you “No balance cable detected push enter to continue” in Charge, Fast Charge
and Storage modes.
Note: We will explain the operating procedure of one channel as the procedure for
channel 1 and 2 is identical.
Power and Battery Connection
LiPo
NiMH
ENTER
ST
A
TUS
BA
TT/
PROG
ENTER
ST
A
TUS
BA
TT/
PROG
ENTER
ST
A
TUS
BA
TT/
PROG
ENTER
ST
A
TUS
BA
TT/
PROG