2
3
• If after several attempts you are unable to connect to Mebo through
your device’s Wi-Fi, press RESET for 5 seconds on the underside of
Mebo using the tip of a pin. After reset, try connecting again.
PROBLEM
SOLUTION
Mebo is not responding
Mebo’s part(s) aren’t moving
Unable to connect to Mebo
through WiFi
• Ensure battery is charged and properly plugged into connector.
• Check to see if Wi-Fi is enabled on your smart device.
• Mebo may be out of Wi-Fi range.
• Inspect MEBO’s joints, claw and wheels for foreign objects.
TROUBLESHOOTING
For more troubleshooting and tips, visit www.MeboRobot.com
2. CHARGING MEBO’s BATTERY
• Plug battery into USB Charger.
• Plug USB Charger into USB port (Not included).
• Charge until battery is completely charged.
(Light on charger will turn green when fully charged.)
• Unplug battery from charger and charger from USB port.
1. ATTACH MEBO’S WHEELS
Mebo’s wheels must be attached before use.
• Carefully align the grooves on the wheels with
the slots on the wheel hubs and snap into place.
(The bigger wheels go in front)
• Pull the treads over one wheel at a time.
GETTING STARTED
3. INSTALLING MEBO’S BATTERY
• Open the battery compartment on the back of Mebo.
• Plug the battery into the enclosed connector. Rest
the battery inside and close the compartment door.
4. DOWNLOAD THE MEBO 2.0 APP
• Download the MEBO 2.0 app and install onto your
smart phone or tablet.
5. TURN MEBO ON
•
Flip the power switch, on the back of Mebo, to turn on.
Mebo will light up and flash when turned on.
6. CONNECT WITH YOUR SMART DEVICE
• Enable the Wi-Fi on your phone or tablet and select
MEBO2 - xx-xx-xx
(name of connection may differ slightly from
this example on your Wi-Fi network list).
• Mebo will stop flashing when successfully connected to Wi-Fi
and the app.
• Once connected please follow in App instructions.
Eye (Camera Lens)
Speaker
Battery Compartment
ON/OFF
Switch
Wrist
Arm
Reset Button
(on Bottom Panel)
All-Terrain
Tread Drive
Light-up Claw
MEBO SPECS
Microphone
RESET MEBO’S WI-FI CONNECTION
•
If Mebo is unresponsive, you may need to press
RESET
to clear and reset Mebo.
•
RESET
can also be used to clear a Wi-Fi password if you have forgotten it.
• Use a pin or unfolded paperclip to press the
RESET
button and hold for 5 seconds.
RESET
*Mebo’s lift capacity should not exceed 250g
Mebo’s wrist has 180°
rotational range!
GREEN LIGHT
= Fully Charged
RED LIGHT
= Charging
Fold Line
DO NOT PRINT
