3
NORMAL OPERATION
Press and hold “DST/-” button for 2 seconds to turn on or turn off the Daylight-saving time (DST) function. Unless
you live in an area that never recognizes daylight-saving time, such as Arizona, the DST function should always be
turned on.
Press and hold “
O
C/
O
F” button for 2 seconds to choose Celsius or Fahrenheit format for temperature.
Press “SET” button to choose normal time or alarm time display. In the alarm time display, it will return to normal
time display after 20 seconds if no buttons are pressed.
TIME AND CALENDAR SETTING
At normal time mode, push and hold the “SET” button for 2 seconds to enter the time display format mode.
Press the “WAVE/+” or “DST/-” button to choose 12Hr or 24Hr. The default time display format is 12Hr.
Press the “SET” button once to confirm and enter the time set mode. The digit hour will flash.
Press “WAVE/+” or “DST/-” button to set the desired hour.
Once the intended hour appears, press the “SET” button once to confirm and the minute will flash.
Press “WAVE/+” or “DST/-” button to set the intended minute.
Once the intended minute appears, press “SET” button once to confirm and enter the setting calendar, The year
flashes.
Press “WAVE/+” or “DST/-” button to set the correct year.
Once the intended year appears, press the “SET” button once to confirm and the month will flash.
Press “WAVE/+” or “DST/-” button to set the correct month.
Once the intended month appears, press “SET” button once to confirm and the date will flash.
Press “WAVE/+” or “DST/-” button to set the correct date.
Once the intended date appears, press the “SET” button once to confirm and exit from the setting mode.
SETTING ALARM TIME
At normal time mode, press the “SET” button once to enter the alarm time mode.
Press and hold the “SET” button for 2 seconds until the alarm hour flashes, then press “WAVE/+” or “DST/-” button to
set the desired hour for the alarm time.
Once the intended alarm hour appears, press the “SET” button once to confirm and the alarm minute will flash.
Set the value of alarm minute by pressing “WAVE/+” or “DST/-” button.
Once the intended alarm minute appears, press “SET” button once again to confirm and exit from the setting alarm
mode.
Note:
At the setting mode, if there isn't any operation within 20 seconds, it will exit from the setting mode automatically.
Switching on/off the alarm
While in the alarm time mode, press “WAVE/+” or “DST/-” button to switch on/off the alarm.
If the alarm icon appears, it indicates that the alarm is activated. In this case, the clock will ring for 1 minute when
the alarm time arrives, then press any button (except “SNOOZE” button) to stop the alarm.
If the alarm icon disappears, it indicates that the alarm is off.
