153.225 Fireball lamp
Warning
:
Prior to first use, please read this manual carefully.
Only for indoor use. Do not use the unit in humid environments.
Unplug the unit from the mains before you open it.
If the mains lead is faulty or damaged, only replace it by a lead recommended by SkyTronic.
SkyTec disco light effects contain modern lamps of high intensity. During the use they develop
considerable heat. Place the light effect at least at 50cm distance from inflammable materials such as
curtains, books, etc. Check that the housing can’t be touched by accident.
Location:
Connect the light effect to an earthed outlet only.
For indoor use only in a dry environment.
Make sure the unit is placed on a strong, heat-resistant surface. Vibrations shorten the life-time of the
lamp.
Do not obstruct the ventilation holes in order to ensure sufficient air flow.
Use
The unit should only be operated by qualified persons.
Disco light effects are not meant for continuous use. An alternating use increases the life time
considerably.
The light effects must be directly connected to the mains, without the use of a dimmer.
Regularly check the ventilation holes and clean them, if necessary.
Replacement of the lamp
Only use high quality lamps that comply with the standard EN60357.
Prior to replacing the lamp, let the unit cool down for 5 minutes.
WARNING!! Do not open the unit while it is in use or plugged into an outlet.
-
Open the housing by removing the two screws on the top.
-
Remove the half ball.
-
Replace the faulty lamps with two E14 240V/25W lamps.
-
Place the half ball back again and fasten it via the two screws.
Trouble-shooting
-
Check if the outlet is powered.
-
Check if the mains switch is set to “1”
-
Check the fuse of the light effect
-
Check if the lamps are not blown and replace them if necessary.
Do not attempt to make any repairs by yourself. All repairs have to be carried out by qualified
staff.
Specifications:
Power ................................................................................................................ 220-240Vac / 50Hz
Consumption............................................................................................................................ 60W
Lamps .................................................................................. 2 x E14 , 240V/40W (ref no. 153.226)
Fuse ................................................................................................................................... F500mA
Rotation speed...................................................................................................20-24 rotation/min.
Dims....................................................................................................................... 195 x 195 x 160
Weight..................................................................................................................................... 1.1kg
