GB
Congratulations on the purchase of this SkyTec mixer.
Please read this manual carefully prior to using the unit.
Warning
:
-
Read the manual prior to using the unit.
-
Keep the manual for future reference.
-
Keep the packaging for safer transport in its original packaging
-
For indoor use only.
-
Prior to the first use, have the unit checked by a qualified person.
-
The unit contains voltage carrying parts. DO NOT open the mixer.
-
When you unplug the unit from the mains always pull the plug, never the lead.
-
Never plug or unplug the unit with wet hands.
-
If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.
-
If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a
mains outlet.
-
Repairs and lamp replacement has to be carried out by a qualified technician.
-
Only connect this unit to an earthed mains outlet of 230Vac/50Hz and 10-16A.
-
Do no place the unit near heat sources.
-
Always unplug the unit during a thunderstorm or when it is not in use.
- If the unit has not been used for a longer period of time, condensation can occur inside the
housing. Please let the unit reach room temperature prior to use.
-
Keep out of the reach of children.
-
All channel controls and the master volume control must be set to zero prior to switching the
unit on.
-
Set the channel slider controls slowly. Fast variation can overload the speakers.
-
To prevent clipping of the amplifier do not set the volume level too high.
-
Switch the amplifier on at latest and switch it off at first.
- Do not use cleaning sprays for the slider controls. The residues of these spray cause dust
deposits in the controls. If a problem occurs, please consult a specialist
.
