11
Figure 2-2. Pendant Control
2-3. Battery Operation
a. Make sure the Battery Indicator and Main
Power Switch indicator lights, on the electrical
panel, are OFF. See figure 2-2. If the indicator
lights are ON, turn AC120V operation OFF with the
main power switch.
NOTE
The table will operate correctly on bat-
tery power with the power cord con-
nected to a wall outlet or disconnected.
b. Press the BATT button on the hand-held
pendant control. The pendant control buttons and
the red BATTERY indicator light, located in the
upper right corner of the pendant control, will illumi-
nate.
c. The table is now ready for BATTERY opera-
tion.
d. To extend the battery charge life, turn the
BATTERY power OFF with the pendant control
when the table is not going to be used.
NOTE
Battery Operation must be turned OFF
at the pendant control. It cannot be
turned OFF using the main power
switch.
The pendant control buttons and the green AC
120V, POWER indicator light located in the upper
right corner of the pendant control will illuminate.
See figure 2-2.
c. The table is now ready for 120VAC operation.
AC120V POWER ON
INDICATOR LIGHT
(GREEN)
Summary of Contents for 6700B HERCULES
