20
2-11. Table Top Rotation.
NOTE
Normal table top position is with the
head (and back) section over the power
cord end of the base.
a. The table top can be horizontally rotated 210°
without having to rotate the entire table. Refer to
figure 2-21. To rotate the top, turn the TOP ROTA-
TION LOCK HANDLE counterclockwise to re-
lease, grasp the table by the head end and rotate
the top counterclockwise. Lock the top in position
by tightening the TOP ROTATION LOCK HANDLE
clockwise.
WARNING
Always lock the table top in position
after rotation. DO NOT rotate the top
with an unevenly distributed patient
weight load as instability may result.
Figure 2-21. Top Rotation
b. The use of the optional support rod allows the
table top to be rotated 90° from the base. See figure
2-22.
WARNING
•Make sure the TOP ROTATION LOCK
HANDLE is tightened and the brakes
are set before transferring the patient.
•Exercise caution with the table top
rotated 90° to the base since an improp-
erly distributed patient load may cause
the table to be tipped over. A table
support rod is required for 90° position-
ing. See figure 2-22.
TOP ROTATION
HANDLE
Summary of Contents for 6700B HERCULES
