PEPPER CROSS LIGHT
1.
Use a piece of line to thread
the packing loops together.
Don’t forget the four corner
loops mounted slightly further
back on the panels.
Depending on the size, the
PEPPER CROSS LIGHT has a
different amount of packing
loops:
90 & 110: 20 loops
135: 24 loops
180 & 225: 28 loops
2.
Secure the packing loops
for now and pull on the main
riser and the attached loops
until it is tight.
3.
The PEPPER CROSS LIGHT is
a cruciform rescue parachute
with four corner points, so lay
out the canopy with one corner
at the bottom, one on the left,
one on the right and one on top.
Start with the first corner at
the bottom and smooth the
material by running your hand
along it on the table.
4.
Pull the base from one line
attachment point to the next
along the seam to the side
you are sorting and smooth the
crossed panel. A line separator
and a weight will help to secure
the already sorted lines.
Packing Instruction
33
32
Packing Instruction
PACKING PROCESS
Follow the steps below to pack your rescue chute:
3
4
2
1
EN
