9
1
1
9
11
3
21
21
7. Remove the two Plastic Caps from the
Jungle GYM. Attach the “U” Frame 2 (3)
to the Jungle GYM with eight M8X20mm
Button Bolts (11) and four M8 Arc
Washers (9) and four M8 Washers(21).
Congratulate! You have finished the Jungle GYM Swing Set assembly now and can enjoy it.
12
8. Tighten all the Nuts.
9.Use the hammer to make the anchor into the ground in the direction as shown below.
The anchor effect is to prevent tipping, overturning, or lifting of the support members.
Note: The anchor is not provided in this product and need to be purchased seperately. Recommended the
size of the anchor is shown as below.
8mm
34mm
305mm
Anchor
Anchor
