Safety Note: Do not use the trampoline withoutthe
Frame Pad. The Frame Pad is designed to reduce the pos-
sibilityof injuries due to jumpers coming in contact with
the trampoline frame. Ifyou do not have a Frame Pad,
contact your dealer to obtain one. Properly install the
Frame Pad before using the trampoline.
7. Look under the trampoline pad and locate the straps
attached to the underside of the Frame Pad.
Position each outer strap so that one strap is tied on each
Repeat this step withthe remaining straps (not shown).
8. Using the included plastic tie, attach the Safety Placard
(6) to the frame near the point where jumpers willclimb
onto and off the trampoline.
The trampoline is now fully assembled. Make sure that
all parts are securely attached. Familiarizeyourself and
all users of the trampoline withthe safety precautions,
use and instructionalmaterials, and care and maintenance
instructions in this manual before using the trampoline.
14
Straps
Frame
Frame
6
DISASSEMBLY (TAKING APART)
To disassemble (take apart) the trampoline, followassembly steps 1 through 8 in reverse order. Do not attempt
to disassemble any frame parts before the springs and the mat have been removed. Use gloves to protect your
hands from pinch points whiletaking the trampoline apart.
Inner Straps
V-ring
side of the frame as shown. One end of each inner strap
through the V-ring, then tied them up.
