SKY497 Pilot’s Guide
3-1
Operating
Instructions
C h a p t e r 3
Introduction
This chapter lists the
SKY497
operating instructions and
describes its fault modes.
Turn On the SKY497
To avoid power surges that could damage the
SKY497
and the
optional
WX-1000
, start your engines before turning on the
SKY497
.
1. Turn the
OFF/BRT
knob clockwise to the desired display
brightness.
A startup screen similar to figure
3-1
appears and stays on the
display until the power-on self test is complete. (The
L-3
logo
will replace the existing
BFG
oodrich logo sometime after the
corporate transition is complete.)
If the
SKY497
passes the
test, and your aircraft
has a squat switch, and
your aircraft is on the
ground, the standby
screen appears (figure
3-2
).
If the
SKY497
passes the
test, and your aircraft
has a squat switch, and
your aircraft is in the
air, the traffic screen
appears (set on the
6
Figure 3-1. Startup Screen
BRT
OFF
CAUTION
Summary of Contents for SKY497
Page 1: ...Traffic Advisory System Model SKY497 Pilot s Guide for the ...
Page 28: ......
Page 42: ......
Page 46: ......