Chapter 3 – Operating Instructions
SKY497 Pilot’s Guide
3-7
Respond to Traffic Advisories
Do not attempt evasive maneuvers based solely on traffic informa-
tion on the display. Information on the display is provided to the
flight crew as an aid in visually acquiring traffic; it is not a replace-
ment for
A
ir
T
raffic
C
ontrol
(ATC)
and
S
ee
&
A
void techniques.
When the
SKY497
issues a
TA
, look outside for the intruder
aircraft. When you spot an intruder aircraft, use normal right-
of-way procedures to maintain separation.
Turn Off the SKY497 and the Optional WX-1000
Rotate the
OFF/BRT
knob on the display bezel counterclock-
wise until the switch turns off.
Operate the WX-1000 Without the SKY497
After removing the
SKY497
for maintenance, maintenance
personnel must install a jumper plug if you want to continue
using the
WX-1000
.
Operate the SKY497 Without the WX-1000
After removing the
WX-1000
for maintenance, maintenance
personnel will move the
WX-1000
maintenance switch to the
OVERRIDE
(
WX-1000
maintenance) position to allow continued
operation of the
SKY497
.
Failure Response
All errors indicated by a
SKY497
F
ailed screen (figure
3-4
)
prevent continued operation of the
SKY497
in
SKYWATCH
mode; however, error
#20
,
B
arometric
A
ltitude
I
nput, is a
recoverable error. For example, if you turn on and try to
operate the
SKY497
before you turn on the barometric altitude
source or before it comes on line, a
SKY497
F
ailed screen
appears with error
#20
and continued operation of the
SKY497
in
SKYWATCH
mode is not possible; but when you eventually
turn on the barometric altitude source and it comes on line,
the
F
ailed screen disappears and operation returns to normal.
Failure Response
WARNING
Summary of Contents for SKY497
Page 1: ...Traffic Advisory System Model SKY497 Pilot s Guide for the ...
Page 28: ......
Page 42: ......
Page 46: ......