Setting
Description
TA
TA SEEK mode:
When newly tuned station does not receive TP information for 5 sec, the radio retunes to next
station which has not the same station(PI) as the last station, but has the TP information.
When TP information gets lost at the current station for retune time which is set by RETUNE
SHORT( 30 sec ) or RETUNE LONG ( 90 sec), the radio start to retune to next same PI
station. When same PI station does not catch in 1 cyclic search, the radio retunes to next
station with TP information.
TA ALARM mode.
When this mode is selected, any automatic retune mode is not activated. Only double beep
sound ( ALARM) is out -put .
So, in this mode, the unit keeps the current station anyhow.
( The higher priority is PI rather than TP.)
PI When different PI sound (DIP) is heard once in a while, the DIP ‘s sound will be heard for less
than 1 second.
PI MUTE mode
Under the same situation, a mute sound will be heard for less than 1 sec.
REG
Regional mode ON
AF switching or PI SEEK is implemented to the station which have all PI codes are the same
as current station. REG of individual segment is turned on also together with displaying “REG
ON” on numeric display for a few seconds.
* In double displaying mode, the individual segment may be deleted in case of not
enough- space in display.
Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK is
implemented. REG of individual seg. is turned off together with displaying “ REG OFF” on
numeric display for a few seconds.
RETUNE
The initial time of automatic TA search or PI SEARCH mode is selected. When PI information
is not caught for retune time, the radio start to retune to next same PI station. When same PI
station does not catch 1 cyclic search, the radio goes to last
satiation and waits for 4 -5 minute until PI code is received.
-
RETUNE L mode : Selected as 90 seconds.
-
RETUNE S mode: Selected as 30 seconds.
MASK
MASK DPI mode : masked only the AF which has Different PI .
MASK ALL mode : masked the AF which has Different PI and NO RDS signal with high
field strength
EONTA
EONTA LOCAL mode
When the filed strength level of EON linked is less than the threshold level, the radio does not
switch that station, and a customer can hardly listen to any disturbances.
EONTA DISTANCE mode
EON TA switching is try to implemented by the information of current station . When EONTA
DISTANCE mode is selected, “ EONTA DX” on numeric display is indicated for a few seconds.
SKYWAY GM-4300NAVI PMP
Page 25
Setting
Summary of Contents for GM-4300 Navi
Page 1: ......
