……………………………………………………
9. Masten
Seite 23
| Bedienungsanleitung SkyWind NG, Version 5.1
Bitte lassen Sie eine Dach–
oder Hochinstallation immer durch spezia-
lisiertes Personal durchführen. Beachten Sie immer die Bauvor-
schriften und die statischen Gegebenheiten Ihres Bodens / Gebäudes.
Verwenden Sie immer Stahlmasten. Verwenden Sie insbesondere
keine Aluminium oder andere, aus weicheren Materialien bestehen-
den Masten, da diese aufgrund geringerer Zug–
und Schwingungsfes-
tigkeit zu gesteigerter Vibration oder, im schlimmsten Fall, durch Auf-
schwingen sogar zum Mast–
oder Rotorbruch bei Sturm führen.
Richtig
Richtig
9.1 SkyWind NG Masten
Die
SkyWind NG
ist für die Montage auf einem Mast mit einem Außendurchmesser von, an der
Mastspitze, 60mm ausgelegt. Der Mast muss so lang sein, dass die Anlagengondel mindestens
in 8 m Höhe über Grund steht. Für eine Ertragsprognose ist eine Nabenhöhe von mindestens
10m erforderlich.
Der Mast muss immer die Schubkräfte der Anlage und deren Vibration aufnehmen können oh-
ne in Resonanz zu geraten. Aus diesem Grund sollte ein Mast mit einer Länge von mehr als 2 m
niemals ausschließlich mit 60 mm Durchmesser ausgeführt werden. Es muss jedoch darauf ge-
achtet werden, dass auf der Länge des Rotorblattes 70 mm Mastdurchmesser nicht über-
schritten werden (sh. Bild). Andernfalls treffen Wirbel des Masten auf das Rotorblatt und führen
zu
‚
helikopterartigen
‘
Geräuschen sowie Vibration die Ihre Anlage beschädigt.
Falsch
Entscheidend für geringe Vibrationsübertragung ist eine
ausreichende Wandstärke bzw. ein ausreichender Mast-
durchmesser die ein federn im Mast ausschließen. Ein
federnder oder in sich schwingender Mast zerstört Ihre
Anlage in kürzester Zeit!
BLITZSCHUTZ: Schließen Sie Ihren Masten auf jeden Fall
an Ihre Blitzschutzanlage an! Da die gesamte Anlage aus
Metall ist kann ein Schaden so meist vermieden wer-
den. Sprechen Sie mit Ihrem Blitzschutztechniker.
Verwenden Sie 60 mm Durchmesser für die oberen 100
cm der Mastlänge. Auf keinen Fall jedoch für mehr als
200 cm Mastlänge.
Masten sind
in sich
absolut steif zu konstruieren.
Schwingungen sind unzulässig!
Generell hilft Ihnen gerne Ihr Dachdecker oder Erneuerbare
-
Energien Fachbetrieb. Achten Sie
jedoch auf ausreichende Wandstärke und Robustheit des gewählten Masten. Der
Eigenschwin-
gungsbereich der Anlage liegt bei ca. 10
-
50Hz
. Wenn Ihr Mast eine Schwingung ausbildet
muss
sofort(!)
eine Modifikation vorgenommen werden. Die Verwendung eines geeigneten
Masten ist essentiell für die Lebensdauer der Anlage. SkyWind Energy übernimmt keine
Haftung für Schäden wie z.B. Schwingbrüche die aufgrund falscher Mastwahl entstehen.
Aufsparrenhalterung vgl. S. 21