……………………………………………………
9. Masten
Seite 24
| Bedienungsanleitung SkyWind NG, Version 5.1
…………………………
9.2 Hinweise zur Dämpfung von Masten
Jeder schnell rotierende, bzw. schwingende Körper sollte nur gedämpft mit der Dachstruktur
verbunden werden. Diese wird sonst schnell zu einem Resonator. Weiterhin entstünden durch
das feste Ende schädliche Schwingungen im Masten die Ihre Turbine beschädigen oder sogar
zerstören können. Eine Entkopplung bedeutet nicht, dass der Mast in Resonanzschwingungen
geraten darf. Ein verwendeter Dämpfer muss:
-
Ein Vollentkoppler sein, dass heißt es darf keine feste Verbindung mehr zwischen Dach und
Turbine bestehen. Weder über Ziegel, Balken, Bauteile etc. noch über den Entkoppler.
-
Schall–
und Schwingungsbeseitigung müssen gewährleistet sein
-
Dämpfung in allen Kraftachsen muss gewährleistet sein
Bei der Planung muss die Härte des Dämpfers, des Untergrunds auf dem er montiert wird und
der Formfaktor, insbesondere die Höhe, beachtet werden.
Bei jeder Installation muss jedoch beachtet werden, dass die Anlage eine Schwingung von etwa
10
—
50Hz bedingt durch Ihren Betrieb anregt. Wenn die Montage und der Mast in diesem Be-
reich zu Eigenschwingungen angeregt werden können, führt dieses binnen kurzer Zeit zu einer
Zerstörung der Anlage sowie einem extrem lauten Betrieb.
Grundsätzlich sollte die Anlage immer möglichst weit von Trittstufen im Dach, festen Verbin-
dungen durch die Dachisolierung sowie darunter liegenden Schlafzimmern entfernt montiert
werden. Die Anlage ist zwar meist sehr leise im Betrieb, jedoch stellt sie immer eine gewisse
Geräuschquelle dar. Installieren Sie gegebenenfalls auch zusätzlich eine Nachabschaltung zur
Geräuschreduzierung.
Eine entkoppelte Anlage, also der Mast und dessen Rahmen, darf an keiner Stelle feste Teile
berühren. Andernfalls ergibt sich, zum Beispiel bei einem Dachstuhl, ein Geräusch das etwa mit
dem einer laufenden Waschmaschine verglichen werden kann. In diesem Fall muss der Berüh-
rungspunkt gefunden und beseitigt werden.
Achten Sie darauf, dass gerade entkoppelt montierte Masten einer zuverlässigen Abschaltung
bedürfen, da andernfalls aufgrund des Bewegungsspielraums zu große Spannungen in der Hal-
terung induziert werden könnten.
…………………………
Schwingungsdämpfer der Fa. ROSTA
Wartungsfrei, Abrisssicher, unempfindlich