SkyWing MXS Build Manual Download

Page: 4 / 5

Note: SkyWing’s products are updated frequently. As a result, there might be minor

inconsistencies between this manual and the product being built.

13.

Insert the landing gear as shown in the
photo.

14.

Install the motor and then glue the frontal
piece to the fuselage.

15.

Stick the ESC to the fuselage with a piece
of Velcro.

16.

Install the two metal hooks into the pre-
drilled holes in the wing halves.

17.

Glue the two small wing-root pieces to the
wing halves respectively.

18.

Finally, installing the SFGs is optional.

Summary of Contents for MXS

Page 1: ...lane MXS Build Manual Warning This product is not a toy Children under 12 years of age or first timers should build and fly the product with the help of an experienced RC pilot Model planes are potentially dangerous and can cause harm to people and properties if operated inappropriately Please always be safety minded when building and operating with your model plane ...

Page 4: ...t the landing gear as shown in the photo 14 Install the motor and then glue the frontal piece to the fuselage 15 Stick the ESC to the fuselage with a piece of Velcro 16 Install the two metal hooks into the pre drilled holes in the wing halves 17 Glue the two small wing root pieces to the wing halves respectively 18 Finally installing the SFGs is optional ...

Page 5: ...ength 1152 mm Wing Area 30 4 dm2 AUW without battery 870 g Power Set up Motor 3715 KV820 Brushless Outrunner Battery 3 cell 20 25C LiPo 1800 2200 mAh ESC 40A Propeller APC 13x6 5E 12x6E Servos 12 gram 1 5 2 0 kg 0 1 0 2 s Control Set up Aileron Throws 35 40 degrees Elevator Throws 40 45 degrees Rudder Throws 40 45 degrees CG Position 115 120 mm from the leading edge of the wing ...