13
Function and Control
On/Off
Mode Setting
Press the "
" button to turn on or off the unit.
In on-state, press the "
" button to switch the operation modes as the sequence shown in below:
Auto
Cooling
Heating
Dry
Fan
2))
21
F
6(7
7(03
$''5
&+(&.
'$< +285
6(7
DRY
G-CONTROL
FRESH-AIR
Fan Speed Setting
Note:
● After in stallation completed, wired controller will detect the unit type automatically. Different types
may have different ways of fan speed display, it can be divided into the 2 kinds above.
● In dry mode, the fan speed is default to low fan speed and can not be adjusted.
Press "
" button, fan speed of indoor unit will change as the sequence below:
2))
21
)
6(7
7(03
$''5
&+(&.
'$< +285
6(7
'5<
*&21752/
FRESH-AIR
Temperature Setting
Press "
" or "
" button to increase or decrease setting temperature in on-state of the unit. If
press either of them continuously, temperature will be changed rapidly. Temperature setting range
is 16°C~31°C (61°F-88°F).
Note:
In Auto mode, the setting temperature is un-adjustable.
2))
21
F
6(7
7(03
$''5
&+(&.
'$< +285
6(7
DRY
G-CONTROL
FRESH-AIR
Note:
You cannot set to a mode from the wired controller of the indoor unit that conflicts with the master
wired controller of an indoor unit.
● When set the auto mode, the indoor fan speed will be changed according to the indoor ambient
temp., The fan speed strip is not displayed.
Swing Setting
2))
21
)
6(7
7(03
$''5
&+(&.
'$< +285
6(7
'5<
*&21752/
FRESH-AIR
With the wired controller off, press the "
" and"
" button for 5 seconds to switch between
regular swing and fixed swing.
● Regular Swing
Press the "
" button with the power on to turn the auto swing function on/off.
● Fixed Swing
When powered on, the swing mode changes in the sequence shown below each time you press
the "
" button:
No display
