PLAYBACK
·
In playback mode, roll right wheel to choose the DVR, short press right wheel to play and pause
.
·
Left wheel to adjust the volume.
·
When playing the DVR, roll the right wheel to fast forward or fast backward.
·
.
Press the Right button to quit DVR
·
Press the Left button to delete DVR.
Setting
·
Short
press
right
button to pop up or quit system menu.
Roll right
shuttle
wheel
to
navigate
,
press
the
wheel
into
the
sub
menu
.
·
Head Tracking
·
The
head tracking
button
is
on
the
right
side
of
the
goggles.
·
The gyro required for an initialization time. When it is powered on, goggles must be kept horizontal
and stable as long as possible. When hearing the sound of a "beep", the initialization is done.
·
Hold HT button to reset the PPM signal to the center, goggles will beep when press the button.
Di
sable
the
Headtracker
can
save
the
gyro
initialization
time
to
speed
up
goggles
boot
time
.
Image
In
image
setting
menu
,
customer
have
standard
,
bright
,
vivid
,
soft
and
3
customized
files
to
select.
Customer can adjust Brightness, Contrast, Saturation, Hue and Sharpness to suit different environment .
in 3 user
1/2/3, the image setting can not change in 4 pre-set files.
DVR
·
Left button is record button and stop button.
·
Build
in
DVR
H264
encoding
,
SD
card
recommend
Class10, SD card can support up to 128GB.
·
SD
card
must
be
formatted
into
FAT32
,
user can get into system menu to select the Format SD .
·
The video recording function can be used in both the RF Mode and the AV IN Mode.
·
By default, when recording the video (including: Recording the sound), the "sound recording" function
can be turned off in the system menu, then the video signal can be recorded only.
·
Automatic recording: enable this function , if the video signal has been detected, the recording will be
activated automatically. The recording function can also manually be stopped by press the REC button.
<
Auto&Follow> on, the DVR will auto start recording when video signal is on, and stop recording after 30s
when signal is cut, if signal is on again, DVR will start recording again.
<Follow> Press the REC button to manully start recording，DVR will stop recording after 30s when signal
is cut, but it will auto start recording when signal is on. press REC button agian can manully stop rec to
save SD card space.
Cyclic recording：Overwriting of older recordings on or off (in case of storage space is wasted).
·
·
The video recording File will be automatically divided into the multiple Files. In the menu system, the
video length can be set as: 5 minutes, 10 minutes, 20 minutes and 30 minutes. The default video length
can be set as 30 minutes / each File.
5
