17
/
22
Copyright (c) 2016-2017 Shanghai Slamtec Co., Ltd.
Apollo will restart once the upgrade finished. Before that, please ensure that
Apollo has sufficient electricity.
4.
WiFi configuration;
5.
Start diagnosing SLAMWARE core;
6.
Modify admin password;
For usage details, please refer to the following document:
https://wiki.slamtec.com/display/SD/SQ001+SWeb+Function
+Overview
Charging and Battery
There are two ways to charge Apollo battery.
Contact Charging
Apollo has a charger supported automatically recharging. When the battery is
lower than 30%(this value can be adjusted by the upper system according to actual
requirements), Apollo will find the charger by itself and start recharging
automatically.
Manual Charging in Emergency
In some unexpected situations, like Apollo cannot recharge itself temporarily, user
can use emergency charging cable to charge Apollo The emergency charging port
of Apollo is shown in the following figure. Please use the emergency charging
cable to connect the emergency charging port on the charger and the charging
port on Apollo
Once the fan inside the charger starts work, the charger starts charging for Apollo.
Note: there is no indicator lighting up for charging in emergency.
