16
/
22
Copyright (c) 2016-2017 Shanghai Slamtec Co., Ltd.
Connect to Computer
Wired Connection
According to the requirements from actual application development, we have
designed a RJ45 Ethernet port on the extended platform of Apollo. Therefore, user
can directly connect Apollo to PC via network cable for extension or further
development.
Wireless Connection
To help our user test Apollo and meet the requirements in future actual
application scenarios, Apollo also supports wireless connection. User can connect
to the SSID of Apollo with a computer and then connect to Apollo with its default
IP address 192.168.11.1. In addition, user can use our Web Portal tool to distribute
a specific IP address for Apollo and use it for connection.
Debug Tools
RoboStudio
RoboStudio graphical tool is used for testing and controlling Apollo. Please
download it from our official website as below:
http://www.slamtec.com/cn/RoboStudio
In the same page, we also provide a document to introduce the usage of this tool.
Web Portal Tool
During developing, testing and controlling the SLAMTEC robtots like Apollo, our
users can do many things to our robot via the Web Portal tool, such as checking
basic information,upgrading firmware and configuring WiFi. (Default username:
admin
. Default password:
admin111
)
Our Web Portal currently supports the following features:
1.
Check the information of the robot;
2.
Restart the SLAMWARE module;
3.
Upgrade firmware
Slamtec provides Apollo firmware renewal and upgrade regularly. Our users can
upgrade firmware via the Web Portal tool. Please ask for the latest firmware from
our support engineers or sales representatives. The upgrade progress lasts for
5~10 minutes and the buzzer beeps during the upgrade process.
