27
RAVEN MTi
Assembly and Setup
Review of Touch Calibration
IMPORTANT
Calibration is the most important process for accurate use of the screen.
Failure to calibrate properly will result in poor touch performance.
DO NOT RUN ANY APPLICATIONS UNTIL CALIBRATION IS COMPLETED
1.
Run the RAVEN MTi installer and download the drivers onto your hard
drive.
IMPORTANT
:
Make sure to use the included UNINSTALL MULTI TOUCH PLATFORM
application if any preexisting Multi Touch software has been
installed, as existing Multi Touch software will complicate the install
process. In this case, the uninstallation package should be run
primary to the included Multi Touch Platform Driver package.
2.
Restart your computer for changes to take effect.
To calibrate RAVEN MTi use the following procedure:
1.
Launch MultiTouchPlatform. This can be found in your application folder.
(We recommend moving this to your dock.)
2.
Press the
Calibration
button on the home screen.
3.
Follow the prompts on the screen and touch the center of each “+” as it
appears.
4.
Repeat steps 2-3 until an accurate calibration is achieved.
Important notes about screen calibration:
