21
Timer Remote Start
ALWAYS SET THE PARKING BRAKE WHEN USING ANY MODE OF
REMOTE START
To engage Timer Remote Start, press the "T" button. At this time, the
icon will appear, followed by remotely starting the snowmobile and
confirming with a three-note music tone and the exhaust cloud icon
will run. With a successful start, the engine will run for the programmed
time in feature 1 of the features and options.
See chart on page 17.
Timer Mode will function for a period of 24 hours from activation and will
operate based on the options selected on Feature 2 of the Features and
Options Menu.
See chart on page 17
. To cancel the Timer Mode, push
"T" button again and the
icon will expire.
Temperature Auto-Start
ALWAYS SET THE PARKING BRAKE WHEN USING ANY MODE OF
REMOTE START
Unlike Turbo and Timer modes, Temperature Auto Start must be engaged
from the programming menu. To operate Temperature Auto Start,
see page
16
. With a successful start, the engine will run for the programmed time
in feature 1 of the features and options.
See chart page 17
.
Turbo Mode Run Time/Valet Mode
ALWAYS SET THE PARKING BRAKE WHEN USING ANY MODE OF
REMOTE START
This feature will allow cool down for turbo units or can be used as a valet
mode. To activate Turbo Mode, press
twice. To deactivate Turbo Mode,
press
twice again. Wait five seconds for the
icon to expire from
LCD screen. Option 1 = 30 seconds, 2 = 1 minute, 3 = 3 minutes -
See
chart on page 17
. To use Turbo Mode, with engine running set the park-
ing brake. Apply hand brake, remove key from snowmobile. The engine
will shut off when selected time expires.
Note: RPM cutoff is active during Turbo Mode but brake cutoff is not.
For Valet Mode, insert the key back into the ignition and turn to run posi-
tion. Apply the hand brake - now Turbo Mode is deactivated and snow-
mobile can be driven again.
