3
SAFETY AND CARBON MONOXIDE WARNING!!!
The following warnings MUST be observed at all times:
Once SledStart
TM
is installed on your snowmobile, it will start the snow-
mobile with a command signal from the 2-way LCD remote control trans-
mitter. LCD remote will confirm a successful start with a three note music
tone and the exhaust cloud icon
will appear. SledStart should NEVER
be operated in an area that does not have adequate ventilation. The fol-
lowing precautions are the sole responsibility of the user: however, the
following recommendations should be made to all users of the SledStart
system.
a) Never operate in an enclosed or partially enclosed area that does
not have adequate ventilation such as a garage.
b) When parking in an enclosed or partially enclosed area or when
servicing the snowmobile, SledStart must be disabled using the by-
pass toggle switch.
c) It is the users sole responsibility that any time SledStart is active
the parking brake must be set.
d) It is the users sole responsibility to properly store all remote trans-
mitters out of the reach from children to assure that SledStart does
not unintentionally remote start the snowmobile.
e) The user must install a carbon monoxide detector in or about the
living area adjacent to the snowmobile. All doors and windows lead-
ing from adjacent living areas to the enclosed or partially enclosed
snowmobile storage area must at all times remain closed.
f) Use of this product in a manner contrary to its intended mode of
operation may result in property damage, personal injury, or death.
1) Never remotely start the snowmobile with the clutch guard,
clutch cover, or clutch body panels removed.
2) Never remotely start the snowmobile with the keys in the
ignition.
3) The user will be responsible for making sure the safety pin
switch is installed, adjusted, and operating correctly at all times
wherein the snowmobile will not start with the clutch cover or body
panels removed.
g) After the SledStart module has been installed, test the toggle switch
and safety pin switch for correct adjustment and operation by perform-
