background image

Quick Start Guide

1. CONNECT THE TV BLUETOOTH

®

 TRANSMITTER TO A POWER SOURCE:

- Connect the mini-USB end of the black cord to the Bluetooth

®

 transmitter’s mini-USB port.

 
- Connect the standard USB end of the same black cord to a power source such as a USB port on a  
  computer, TV, etc. or the enclosed gray AC power adaptor.

2. CONNECT THE BLUETOOTH

®

 TRANSMITTER TO THE AUDIO SOURCE:

 

 

- If you are connecting to a TV or computer with a 3.5mm audio port, simply plug the 3.5mm  
  Audio Cable into the TV Bluetooth

®

 Transmitter on the TV or computer. You do not need the  

  RCA-Y adaptor.

 

- If you are connecting to a TV without a 3.5mm port, then you will need the RCA-Y adaptor.
     

 Plug the RCA-Y adaptor’s red end into the audio right (red) and the white end into the audio  

       left (white) of the cable box or satellite receiver.
     

 Then connect the 3.5mm Audio Cable to the RCA-Y adaptor and the TV Bluetooth

®

 transmitter.

 

3. PAIR YOUR SLEEPPHONES

®

 WIRELESS HEADPHONES TO THE TV BLUETOOTH

®

 TRANSMITTER:

 

 

- Hold the TV Bluetooth

®

 transmitter (audio transmitter - black box) button for approximately 5 seconds or  

  until you see a fast blinking blue light.
- Bring your SleepPhones

®

 Wireless headphones within 3 feet (1 meter) of the TV Bluetooth

®

 transmitter.

- Turn on your SleepPhones

®

 Wireless headphones by 

  holding down the middle square button for 5 seconds,  
  you will hear an ascending 3 ring tone followed by a  
  series of double beeps. When the module is in pairing  
  mode, you will notice a fast blinking red light. The beeps  
  will last for only 10 seconds, but the device will remain  
  in pairing mode until it is paired. When the product is  
  successfully paired with the TV Bluetooth

®

 transmitter  

  you will hear a long tone in the speakers to indicate  
  it is connected. The SleepPhones

®

 module with have  

  a slow red blinking light once it is fully paired. The TV  
  Bluetooth

®

 transmitter will have a solid blue light to  

  indicate that it is fully paired.

TO WATCH A 1-MINUTE 

INSTRUCTION VIDEO 

www.SleepPhones.com/TellyPhones

www.SleepPhones.com/TellyPhones

Reviews: