ELECTRIC HI-LO COMBO
SleepSafeBed.com
1-866-852-2337
3629 Reed Creek Dr. | Bassett, VA 24055
Operator’s Guide: Electric Hi Lo Combo
Operating the HiLo
Combo Foundation
with the Remote.
This foundation uses a corded
remote to control 3 functions:
1) Controls mattress height 10”
2) Controls head elevation to 70
°
3) Controls knee elevation to 35
°
REMOTE LOCK OUT Procedure:
Press and HOLD BOTH DOWN BUTTONS
on HEAD and FOOT articulation functions
for about 5 seconds. The LIGHT on the
REMOTE will FLASH when it is locked.
To UNLOCK, repeat his procedure.
To RESET Remote:
Press and hold the DOWN button for the HiLo
function when the bed is completely down for
5-10 seconds and wait until you hear the control
box click. This indicates normal functionality.
Handling, operating and
securing the Safety Rails.
Safety Rails on the SleepSafe (Low Bed),
SleepSafe II (Medium Bed) and SleepSafer
(Tall Bed) are removable. Removing the Top
Rail first on the Tall bed is recommended.
The top Safety Rail on the SleepSafer with
the Extension is not removable. The Top
Rail attaches to the Extension.
It is always recommended to handle the
Safety Rails gently and firmly with both
hands. Be sure both sides of the Safety Rail
are securely attached to the post before
leaving the bed alone.
14
REMOVE Safety Rails
from their down position.
Gently lift the rail UP and OUT.
To ATTACH, place IN both strikes
and let the rail DOWN.
IMPORTANT:
USE BOTH HANDS
WHEN OPERATING SAFETY RAILS.
IMPORTANT:
Be sure
BOTH sides of the rails are
secured to the posts.
How the Casters Work.
The casters are pre-installed at the factory in
the bottom of the headboard and footboard
legs. It is recommended that the casters are
locked when the bed is in use to add to the
bed’s stability.
The casters are locked when the tab is in the
down position. Unlocked when the tab is up.
LOCKED
UNLOCKED
