background image

Operator’s Guide: Fixed Foundation

Handling, operating and 

securing the Safety Rails.

Safety Rails on the SleepSafe 
(Low Bed), SleepSafe II (Medium 
Bed) and SleepSafer (Tall Bed) 
are removable. Removing the 
Top Rail first on the Tall bed is 
recommended.

The top Safety Rail on the 
SleepSafer Extension Bed is not 
removable. The Top Rail flips up 
and latches onto the extension.

It is always recommended to 
handle the Safety Rails gently 
and firmly with both hands. Be 
sure both sides of the Safety 
Rail are securely attached to 
the post before leaving the 
bed alone.

14

REMOVE Safety Rails 
from their down position. 
Gently lift the rail UP and OUT.
To ATTACH, place IN both 
strikes and let the rail DOWN.

IMPORTANT: 

USE BOTH HANDS 

WHEN OPERATING 

SAFETY RAILS.

IMPORTANT: 

BE SURE BOTH SIDES OF 

THE SAFETY RAILS ARE 

SECURED TO THE POSTS.

How the Casters Work.

The casters are pre-installed at 
the factory in the bottom of the 
headboard and footboard legs. It is 
recommended that the casters are 
locked when the bed is in use to add 
to the bed’s stability.

The casters are locked when the tab 
is in the down position. Unlocked 
when the tab is up. 

LOCKED

UNLOCKED

 

FIXED FOUNDATION

SleepSafeBed.com

1-866-852-2337

3629 Reed Creek Dr.  |  Bassett, VA 24055

Summary of Contents for SleepSafe





















Reviews: