12
Loosen Allen Bolts at Top of SleepSafer® Legs:
Loosening the
Allen Bolts before
adding the
Extension allows
for easier
assembly and
tighter fitting. If
you have flip-up
rails, be sure the
proper legs
match up before
tightening all
Allen Bolts.
Assemble SleepSafer®/Extension Combo
Set Extension on top of your SleepSafer® Bed. Insert one 90mm Allen Bolt
into each of the four vacant holes at the top of the legs and tighten using
the 4mm Allen Wrench provided (Shown by “B” above). Tighten all bolts
and your SleepSafer®/Extension Assembly is complete!
Shown at “A” below:
