How to use a bowthruster
1. Turn the main power switch for the bow thruster on. Turn on the power to the receiver.
2. Turn on the transmitter by pushing the transmitter’s two “ON” buttons. The remote system is
now activated and then turns off automatically appr. 4 min. after the last usage (see page 9).
3. Please take some time to exercise thruster usage in open water to avoid damages to your
boat.
4. Turn the bow in the desired direction by pushing the red button for port movement or the green
button for starboard movement.
How to use the windlass
Please consult your windlass manual for use and precautions.
NB: Max. load on the windlass signal output is 3A!
Remote Control Deactivation
Push the transmitter’s “OFF” button (the remote control deactivates automatically after appr. 4
minutes after the last usage). Turn off the power switch for the receiver.
• If in doubt, try in open water first!
Installation & User Manual, Radio Remote 8985/8986
Page 10
Remote control “ON”
Turn boat to Port
Windlass
Remote control “OFF”
Turn boat to Starboard
Auto-OFF
appr. 4 min.
Down
Up
