background image

Repair Parts and Maintenance Guide

141

Faucets and

Soap Dispensers

The information contained in this document is subject to change without notice.

BASYS

®

  

Infrared Sensor Activated

PARTS LIST—BASYS FAUCETS
Item  

 

No.   Code No. 

Part No. 

Description

 1. 

 

— 

Wall Mount Faucet Assembly

 2. 

3324104

 

EFX-1002-A   0.5 gpm/1.9 Lpm Multi-Lam Spray Head (includes 

insert, o-ring, 2.5 mm allen key, and removal tool)

  

3324103

 

EFX-1001-A   1.5 gpm/5.7 Lpm Aerated Stream Insert (includes 

insert, o-ring, 2.5 mm allen key, and removal tool)

  

3324102

 

EFX-1000-A   1.5 gpm/5.7 Lpm Laminar Stream Insert (includes 

insert, o-ring, 2.5 mm allen key, and removal tool)

  3. 

3324162

 

EFX-1011-A   0.5 gpm/1.9 Lpm Solenoid Valve Caddy Assembly 

– Wall (Green)‡

  

3324163

 

EFX-1012-A   1.5 gpm/5.7 Lpm Solenoid Valve Caddy Assembly 

– Wall (Blue) ‡

 4. 

0324019

 

EFX-19 

Strainer (Filter)

 5. 

 

EFX-1013-A  Mounting Assembly

 6A. 

3324160

 

EFX-1009-A  Bowed Crown Assembly

 6B. 

3324138

 

EFX-1010-A  Solar Crown Assembly

 6C. 

3324139

 

EFX-1018-A  Solar Crown with LCD Assembly

 7. 

 

— 

CR-P2 Lithium Battery

 8. 

3326009

 

MIX-60-A 

Mechanical, Below Deck Mixing Valve

 9. 

0326045

 

MIX-135-A  Thermostatic, Below Deck Mixing Valve

 10. 

3365461

 

ETF-617-A  Bak-Chek Tee Assembly

 11. 

0335023

  EAF-23-A Splitter

 12. 

0335024

 

EAF-24-A  11-13/16” (300 mm) Extension Cable

  

0335025

 

EAF-25-A  47-1/4” (1200 mm) Extension Cable

  

0335015

 

EAF-17-A  126” (3200 mm) Extension Cable

 13. 

0335009

 

EAF-11 

Plug-in Adapter (US)

  

0335041

 

EAF-41 

Plug-in Adapter (EU)

  

0335039

 

EAF-39 

Plug-in Adapter (UK)

  

0335037

 

EAF-37 

Box Mount Adapter

 14. 

3324165

 

EFX-1014-A  Wall Flange

 15. 

 

— 

Purge Tool

NOTE: If changing flow rate caddy and spray insert must be changed in conjunction. 
† Single Supply faucets include Bak-Chek

®

 

— in Item No. column = Not shown in illustration 
— in Code No. and Part No. column = Not sold separately 

‡ Old style / T-shaped contact. 
   New style / Plug contact

6A

6B

6C

14

7

4

1

5

8

3

9

10

13

15

12

11

2

Electrical Connection for up to Six (6) Faucets Using One (1) Adapter

EFX-8XX SERIES

NOTE: HARDWIRE FAUCETS SUPPLIED WITH ONE (1) 47” (1.2 m) EXTENSION CABLE. 
NOTE: EXTENSION CABLES AVAILABLE SEPARATELY. 
NOTE: USE ONLY SLOAN SUPPLIED POLARIZED AND KEYED CABLE ASSEMBLIES. 

IMPORTANT: CUTTING AND SPLICING WIRES WILL VOID WARRANTY.

SPLITTER AND 
EXTENSION CABLE

6 VDC 
PLUG-IN 
ADAPTER

CABLE 
BEHIND 
THE WALL

CABLE 
BEHIND 
THE WALL

CABLE 
BEHIND 
THE WALL

SPLITTER AND 
EXTENSION CABLE

TO ADDITIONAL 
FAUCETS (6 MAX)

Summary of Contents for EFX-8 SERIES







Reviews: