19
en
Start drill motor.
➤
To start the motor with clockwise
rotation, press the button with the “
”
symbol. The motor starts with the high-
est speed.
➤
The last set speed can be automatically
stored (memory function). To start the
power tool with the last set speed, press
and hold the button with the “
”
symbol, and then press the button with
the “
” symbol.
➤
To lower the speed, press the “
”
button.
➤
To stop the drill motor, press the
“
” button.
➤
Do not stop the drill motor during the
drilling procedure.
➤
To start the motor with anticlockwise
rotation, press the button with the “
”
symbol. The drill motor will run as long
as the button is pressed.
When the power supply is disconnected
while the motor is running, a protective cir-
cuit prevents automatic restarting of the
motor. Restart the motor again.
In case of overload, the motor automatically
stops and must be restarted again.
3 41 01 169 21 0.book Seite 19 Mittwoch, 7. September 2011 3:32 15
