22
en
Maintenance.
Before mounting or replacing cutting tools or accessories, pull the power plug.
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Dove-tail guide (Fig. 17).
After several hours of operation, the play in
the dove-tail guide can increase. As a conse-
quence, the drill motor can glide alongside the
dove-tail guide by itself. In automatic machine
operation, this can lead to a malfunction of
the automatic reversing feature. In this case,
retighten all set screws of the dove-tail guide
correspondingly so that the drilling motor can
easily be moved manually, yet does not glide
by itself.
Cooling-lubricant system.
Flush the cooling-lubricant system with
water, clean and drain it completely when not
using the machine for periods longer than
two weeks.
For continuous operation, the cooling-lubri-
cant system must be flushed with water and
cleaned approx. every 4 weeks.
Exchangeable parts
If required, you can change the following parts
yourself:
Application tools, spoke handles, coolant
container, stroke adjustment levers, chip
guard, accessories (Figure 18)
Service
Have maintenance carried out
only through qualified person-
nel. Incorrectly mounted leads and components
can cause serious injuries.
Have the required
service carried out only through a Slugger
customer service agent.
When replacing the power tool's protective
cable bushing or cord between the drill stand
and drill motor is required, this must be car-
ried out by Slugger or by an authorized Slug-
ger Service Agent, in order to avoid
hazardous situations.
When replacing the power tool's cable is
required, have this carried out by Slugger
or by an authorized Slugger Service Agent, in
order to avoid hazardous situations.
WARNING
Fig. 17
WARNING
3 41 01 169 21 0.book Seite 22 Mittwoch, 7. September 2011 3:32 15
