23
en
Cleaning
Prior to any cleaning or mainte-
nance, disconnect the power
tool from the power supply in order to avoid
accidents.
When using in environments
with conductive dust in the air,
such as when cutting metals, this dust can set-
tle in the interior of the power tool. This can
impair the total insulation of the power tool.
Therefore, regularly blow out the interior of the
power tool from outside via the ventilation
openings with dry, oil-free compressed air;
always wear eye protection when doing this.
For additional protection, connect a residual
current device (RCD) on the line side.
Do not attempt to clean clogged or dirty
ventilation openings of the power tool
with pointed metal objects; use non-
metal tools or objects if necessary.
Do not use cleaning agents and solvents
that can cause damage to plastic parts.
These include: Gasoline, carbon-tetrachlo-
ride, chloric solvents, ammonia and domestic
cleaning agents that contain ammonia.
Accessories.
Only use accessories recommended by Slug-
ger.
Warranty and liability.
The warranty for the product is valid in accor-
dance with the legal regulations in the country
where it is marketed.
Environmental protection,
disposal.
Packaging, worn out power tools and acces-
sories should be sorted for environmentally-
friendly recycling. Further information can be
obtained from your dealer.
WARNING
WARNING
3 41 01 169 21 0.book Seite 23 Mittwoch, 7. September 2011 3:32 15
