23
en
Starting and stopping the drill motor
(figure 14).
To start the drill motor with clockwise rota-
tion, press the button with the „
“ symbol.
The drill motor starts with the highest speed.
The last set speed is automatically stored
(
Memory Function
). To start the power tool
with the last set speed, press and hold the
button with the
symbol, and then press
the button with the
symbol.
To lower the speed, press the „
“ symbol.
To increase the speed, press the „
“ sym-
bol.
To stop the drill motor, press the „
“
symbol.
Do not stop the drill motor during the drilling
procedure.
To start the drill motor with counterclock-
wise rotation, press the button with the
„
“ symbol. The drill motor will run as
long as the button is pressed.
When the power supply is disconnected
while the drill motor is running (e.g. removal
of the battery), a protective circuit prevents
automatic restarting of the drill motor. Restart
the drill motor again.
In case of overload, the drill motor automati-
cally stops and must be restarted again.
100
l
% 85
l
% 75
l
% 60
l
% 50
l
%
25
l
%
100
l
%
85
l
%
75
l
%
60
l
%
50
l
%
25
l
%
Memory Function
Fig. 14
OBJ_BUCH-0000000261-003.book Page 23 Thursday, January 11, 2018 5:30 PM
