13.
Maintain Tools with care
•
Keep tools sharp and clean for better and safer performance.
•
Follow instructions for lubricating and changing accessories.
•
Inspect tool cords periodically and if damaged, have repaired by authorized service facility.
•
Inspect extension cords periodically and replace if damaged.
•
Keep handles dry, clean, and free from oil and grease.
14.
disconnect Tools
•
Unplug when not in use, before servicing, and when changing accessories, such as bits and cutters.
15.
Remove Adjusting keys And wrenches
•
Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.
16.
Avoid Unintentional Starting
•
Do not carry a plugged-in tool. Always disconnect from power source before moving.
•
Be sure switches are off before connecting to a power source.
17.
Outdoor Use Extension cords
•
When tool is used outdoors, use only extension cords intended for use outdoors and so marked.
18.
Stay Alert
•
Watch what you are doing. Use common sense. Do not operate tool when you are tired.
•
Do not use when taking medications that may cause drowsiness.
19.
check damaged Parts
•
Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine
that it will operate properly and perform its intended function.
•
Check alignment of moving parts, binding of parts, breakage of parts, mounting, and any other conditions
that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced
by an authorized service center.
•
Do not use this tool if switches do not turn it on and off. Have defective switches replaced by authorized
service center.
important
safety
instructions
4
