3
Support: www.slxtechnology.com/support
1. Connect your UHF aerial downlead to the
UHF socket and connect your FM/DAB
aerial downlead (if applicable) to the FM
socket on the amplifier.
2. Connect your TVs and DAB/FM tuners
to any of the booster’s TV sockets in any
combination.
Please Note:
If your TV does not have a built-in Freeview™
receiver you will need to connect your TV to
the amplifier via a Freeview™ set top box.
Please Note: To view output from the
satellite RF2 output you will need a TV with
an analogue tuner.
1. Connect your UHF aerial downlead to
the aerial input on your Satellite Receiver
and connect your FM aerial downlead
(if applicable) to the FM socket on the
booster.
2. Connect an aerial fly-lead from the RF2
output on the Satellite Receiver to the UHF
input on the booster.
3. Connect your TVs and FM tuners to
any of the booster’s TV sockets in any
combination. Once connected, you can
tune each television to digital terrestrial
channels* and a channel for satellite
viewing.
Note:
Only one satellite channel can
be viewed at any one time without the
use of additional satellite receivers and
subscriptions.
Note:
To operate your digital satellite receiver
from one of the connected TVs you will now
need to install a Link device such as the SLx
Link.
Note:
To view digital terrestrial channels an
aerial must be connected to the Aerial IN
socket on the satellite. Also connected TVs
must have a built-in Freeview™ receiver or be
connected to the booster via a Freeview™ set
top box.
For signal distribution from a Satelllite Receiver
Installing your Booster -
For aerial signal distribution:
ANT
TV1
TV2
2 Way Signal Booster
with integrated IR bypass
approved
DAB/FM
Aerial
DAB Radio
PVR/
Freeview Box
UHF Aerial
TV
TV
4G Filter
(If needed)
