11
1. Press and hold the Macro key for 3 secs. The LED turns ON
when the key is pressed but turns OFF after 3 secs
indicating that the key can be released.
2. Release the Macro key, LED turns back ON.
3UHVVDQGUHOHDVHWKH(;,7NH\WKH/('ZLOOÀDVKRQFHDQG
then remain on.
4. Press and Release the Macro Digit key (numeric keys 1-6)
from which you want to delete the Macro command.
7KH/('ZLOOÀDVKRQFHDQGWKHQUHPDLQRQ
3UHVVDQGUHOHDVHWKH2.NH\WRFRQ¿UPWKH0DFURGHOHWLRQ
7KH/('ZLOOÀDVKVORZO\WLPHVDQGWXUQRII
6. Repeat steps 1-5 to delete other existing macros.
6. Favourite Channel function
• This function allows you to pre-program favourite channels
into one button. For example, if your favourite channels are
5, 21, 53 and 102, you can program these into the program
and scroll between only these channels.
• This function is supported only in TV, SAT and CABLE
modes. You can not use it for other devices. (It is also
supported in AUX mode if Aux is assigned to TV or SAT or
CABLE)
6.1 Program Favourite Channels
1. Press and hold the FAV. CH key for 3 secs. The LED turns
ON when the key is pressed but turns OFF after 3 secs
indicating that the key can be released.
2. Release FAV.CH key, LED turns back ON
3. Following the exact same sequence when you use your
original remote control, enter the channel number you want
to store in the RC050. The maximum number of digits in
the channel number is 6. The LED turns off each time a key
is pressed and turns on after release. If keys other than
Exit, FAV.CH, numeric keys, Enter or “-/--“ keys are pressed,
WKH\DUHLJQRUHGDQGWKH/('ZLOOÀDVKUDSLGO\WLPHVDQG
remain on until a valid key is pressed. The Channel will be
automatically saved after you press the sixth key OR…
3UHVVDQGUHOHDVH)$9&+NH\7KH/('VORZO\ÀDVKHV
times and remains on to indicate it is ready to let you enter
the next channel.
5. Repeat the steps 3 to 4 for another channel selection.
6. Press the EXIT key to exit the Favourite channel program
PRGH7KH/('ZLOOWKHQÀDVKIDVWWLPHVDQGWXUQRIIWR
indicate the setup has been completed.
Note:
• The max. number of channels you can program is 15, if you
attempt to program more they will overwrite earlier
favourites already entered.
• If you start to program a new set of favourite channels, the
previously stored list will be over written.
• If no keys are pressed for more than 15 secs, the LED will
ÀDVKUDSLGO\WLPHVDQGWXUQRII7KH)DYRXULWHFKDQQHO
enter mode will be exited.