Slycma ARIANE 3.1, Commissioning Manual

Ref : 26702                                                         22                                                                07/01/15 
 

PART 7 : Details about the ARIANE 3.1 operations  

BASIC OPERATION 

Opening :

 The open order starts the open cycle if the close or nudging 

orders are not activated. 

The engaged cycle is terminated even if the open order is de-activated and 

ends the opening travel.  

At the beginning of the opening operation, if the landing door is not 

unlocked, the card closes and opens the door three times in an attempt to 

unhook the door. 

If the landing door refuses to be opened, the card ends the opening travel 

and waits for the close order. 

While opening an unglazed door, if an obstacle hampers the movement, 

the door tries to continue to open, but if it is blocked, it ends its opening 

travel and waits for the close order. 

While opening a glazed door, if an obstacle hampers the movement, the 

door stops, closes slightly and resumes its open cycle (Cycle to protect 

fingers by preventing finger jamming). 

Closing :

 The close order starts the close cycle even if the open order is 

activated (this allows overriding the open order and operating only with a 

close order). 

The engaged cycle is terminated even if the close order is de-activated 

(case of controllers operations which de-activate the order as soon as they 

are shunted even though the skate is still not closed).  

While closing, if the door encounters an obstacle, it triggers the shock 

output and goes into slow speed if it is in slave mode, or else the door is 

opened if it is in master mode. 

When the door closes after a shock, it slows down where the shock occurred 

to not hit the obstacle if it is still there. 

When the door and the skate have terminated the close cycle, the closing 

limit switch is actuated.  

Nudging :

 The nudging order is a close command at slow speed without 

obstacle detection. While closing, the buzzer output is activated. 

The nudging order has priority over the open order. 

Intermediate opening :

 This order operates like the open order by 

actuating the intermediate end stop output on which the door has just 

stopped while opening and gives the opening limit switch.