3. Enter the IP address of the communication unit in the address bar and press the enter key.
☑ The user interface opens.
4. To change the language, select the desired language in the field
Language
.
5. Enter the password in the field
Password
.
6. Select the button [
Login
].
12.8.2 Logging Out of the User Interface
Always log out from the user interface when you have finished your work. If you only close the web browser, you will
not be logged out. If the user interface is left idle for 15 minutes, you will be logged out automatically.
Procedure:
• Select the button [
Logout
].
12.8.3 Accessing the Parameter Overview
1. Log into the user interface as an installer.
2. Select
Data > Devices
.
3. Select the desired device from the list.
4. Select the tab
Parameters
.
12.8.4 Saving Parameter Changes
Requirement:
☐ You must be logged in on the user interface.
Procedure:
1. Change the respective parameter via the field
Value
.
2. To adopt this value for all devices of the same type and with the same firmware version, activate the box
Save
for all devices of this device type
.
3. Select the button [
Save
].
☑ The communication unit adjusts the required value on the device(s).
4. Select the button [
OK
].
12 Periodic Actions
SMA Solar Technology AG
System Manual
MVPS22JP-SH-en-11
178
Summary of Contents for 1000-1SC
Page 257: ......
